How to Curl Synthetic Hair Safely

Disclaimer: Please note that some of the links below are affiliate links and at no cost to you I will earn a commission if you purchase through those links. See my Disclosure + Privacy Policy for more info. As an Amazon Associate, I earn from qualifying purchases.

Are you wondering, can you curl a wig with a curling iron? The answer is yes. See all of the ways to curl synthetic hair fiber with heat and without heat. Also how to revive a wig or topper with hot water or steam the professional way. For more wig care posts see my Wig Revival page.

How to Curl Synthetic Hair Safely, blonde wig beach waves
ANGELINA MONO SF COLOR: DANISH BLONDE COLOR DANISH BLONDE #20R/19 ROOT 12

I wrote this post for all the newbies who think once a wig or topper has the frizzed it goes in the trash or you have to cut it. That is not the case you can have your pieces for years if you take good care of them.

Wigs are an investment and if you are not great at styling, I encourage you to find a wig professional in your area and have them maintain them.

Being a professional hair technician, I have mastered the technique of curling synthetic hair with a curling iron and various other ways like hot water and steam.

The difference between curling synthetic hair and heat defiant hair with a curling iron, wand, or flat iron is you must keep synthetic hair wet at all times and the temperature setting on the appliance used needs to be as low as possible and cooled off.

Let me walk you through the steps to revive a wig or topper and get those out of the box waves and curls back!

Let’s start with the safest ways to recurl a wig.

Reviving Damaged Synthetic fiber

How to Smooth the Frizzed Ends

If your synthetic wig has damaged frizzy ends. Wet the wig thoroughly with water. Part off 2-inch sections of the wig, apply steam from a clothing steamer while combing to smooth out the frayed ends.

*You can also smooth synthetic fiber with a flat iron if you do not have a steamer. See the tutorial below.

Curl Synthetic Hair with Rollers

There are a few ways to style your synthetic wig or topper. The absolute safest way to style regular synthetic hair is by rolling the hair with plastic curlers, flexible hair rods, or velcro rollers. The curls will be tighter like ringlets depending on the size of the rollers.

  • While the synthetic hair is soaking wet gently comb through it with a wide-tooth wig comb.
  • Roll the hair on a plastic roller and secure it with roller clips.
  • Go over each curl with steam from a fabric steamer.
  • Let the hair dry, remove the rollers, shake and wear.

How to Make Tight Curls in Synthetic Hair

For curlier styles, you can use perm rods rolled with perm paper end wraps to secure the ends.

  • Wash the wig and roll the entire wig like you were rolling a perm in human hair.
  • Spray the wig with water thoroughly again so it is soaking wet.
  • Go over each curl with steam from a fabric steamer. Do not miss a roller!
  • Let it cool and dry by itself or under a salon type hair dryer on low, remove the rollers, shake, style and wear.

You can apply the hot water method below for this too.

How to Curl a Wig with Hot Water

  • If you have a wig that has really tight curls. Roll the entire wig on perm rods like stated above.

*For tight kinky curls, we rolled the hair on bobby pins instead of perm rods.

  • Heat a saucepan full of water almost to a boil.

FIY: In the shop, we used an electric coffee pot and just poured water through it to heat the water. Then we poured the hot water over the wig straight from the pot.

  • Pour the hot water over the perm rods and let them cool. Do not miss a rod.
  • Let it cool and dry by itself or under a salon type hair dryer on low, remove the rollers, shake, style and wear.

TIP: In the shop, if we were in a hurry, we would put the wig in the freezer to cool it off fast after pouring hot water over them.

How to Curl Synthetic Hair with a Hot Airbrush

hot tools airbrush for wigs

Hot Airbrushes are another safe way to smooth a wig with frizzy ends and recurl the curls. Turn it on and use the lowest setting, It is sort of like a warm blow dryer. You slowly pull the brush through the fiber to smooth the frizzy ends.

I have tried this method on a few wigs and it works pretty well. I prefer the more permanent way of using hotter heat. I found the airbrush does help with smoothing frizzing ends but does not make a very tight curl, it will be more of beach wave.

This is great for restyling a wig to train or move the hair into the direction of your style. It makes that nice downward curve to bangs too.

The hot airbrush is the best way to go if you are afraid to try these other methods.

Curl Synthetic Fiber With a Curling Iron

STOP! BEFORE YOU PROCEED A WORD OF CAUTION: Heat Defiant & Regualr Synthetic fiber can be permanently damaged very easily with heat appliances while styling if not done correctly. If you do not feel comfortable attempting to try these methods, please seek a professional wig stylist to assist you in styling your wigs.

DISCLAIMER: Kim Purvis, Made in a Day, Wig Revival and the Purvis Group LLC are in no way responsible for a damaged wig or hair topper using this advice.

Some say you can not heat style a synthetic wig. It can be done, but it needs to be done very, very carefully. I am a professional hair replacement stylist and this is the way we heat styled synthetic hairpieces and wigs our shop.

In our wig shop, we used fabric steamers to smooth frayed frizzy ends and then a curling iron on very low heat to add curl back into the synthetic hair.

The trick to this method is keeping the hair soaking wet while using a curling iron on the fiber. If you put a curling iron on dry synthetic hair it will melt, burn and stick to the iron.

I recommend trying this method on an old wig or a small piece on the underside of the wig until you get the hang of it.

Let’s start with smoothing the frizzed ends if you do not have a steamer.

How to Smooth a Wig with a Flat Iron

The smoothing of synthetic fiber described below can be extremely damaging to the fiber if not done correctly. See my disclaimer above.

frizzed synthetic wig hair

Supplies:

Instructions:

  • Wash the wig and use a spray bottle full of water to soak the hair so it is dripping wet. Remember you must constantly spray the fiber to keep the hair from drying out.

I use a straightening iron on low heat 130°F. The heating temperature is different for every brand of appliance. Use the lowest setting possible for your appliance.

  • Place the hot end of the curling wand or iron onto a damp hand towel to keep them cool.
mist water on a flat iron
  • Open the flat iron and spray water on the top and bottom metal heat elements. You will hear a sizzle and see steam. That cools the element off.
smooth synthetic hair with a flat iron
  • Without hesitation after misting, immediately place the flat iron on the hair fiber and move it down over the hair really fast to smooth and frizzy fiber. Do not leave the flat iron too long on the fiber.

The rule is if you set the flat iron down to grab another section, spray water on the heating elements to cool them off again.

To be safe only straighten the fizzed ends, not the whole wig. If a section looks ok skip it.

smooth synthetic blonde hair

How to Curl Synthetic Hair with a Curling Iron

Supplies:

Instructions:

  • Wash the wig and use a spray bottle full of water to soak the hair so it is dripping wet. You must constantly spray the fiber to keep the hair from drying out.
mist a curling wand with water to cool it down
  • Heat a curling iron or wand on the lowest setting. Open the curling iron (or wand) and spray water inside the two heating elements, you will hear a sizzle, this cools those surfaces down. Place curling iron or wand on a damp hand towel to keep it cool.

I in this tutorial I used a curling wand at 140°F. You absolutely can use a curling iron instead. The wand is just easier for me.

The heating temperature is different for every brand of appliance. Use the lowest setting possible for your appliance.

curl synthetic wig hair with a curling iron or wand
  • Wrap the wet hair around the wand and hold for 5-7 seconds.
Cup curls in your hand to make them tighter
  • Release the curl by cupping it in one hand.
use duckbill clips to hold synthetic curls while cooling

Clip the curl to the base while it cools so the curl will hold its shape. For looser waves do not use a clip. This is the same method I used in my How to curl & style HD Fiber hair post.

The rule is if you set the curling iron or wand down to grab another section, spray water on the heating elements to cool them off again before touching the hair.

YOU MUST WORK QUICKLY and DO NOT let the hair dry out or let the appliances get too hot or it will burn the fiber.

For extra tight curls, after pulling the curling wand out, quickly roll the curl on a plastic roller and pin it up or hit the pinned up curls with a fabric steamer after curling. This wig has long curls so I did loose waves.

revived blonde synthetic wig with curls
ANGELINA MONO SF COLOR: DANISH BLONDE COLOR DANISH BLONDE #20R/19 ROOT 12

Let the wig dry completely, release the curls, shake, and style as usual.

Conclusion

I hope I have made you feel a little more comfortable learning how to style your wigs on your own.

My advice is to try some of these methods on an old wig or topper before ruining a new one. Practice makes perfect.

One thing I do realize is that everyone has their own way of maintaining their wigs and hair toppers.

There are a lot of YouTube videos out there that show some variations of these methods. Do what is most comfortable for you.

If you are not comfortable attempting to curl synthetic hair with heat or styling your wig yourself please, please, please take it to a wig shop and have them do it for you.

Wig revival newsletter

Love it? Pin it!

complete guide to curling synthetic  wigs with heat appliances,
Park Lane Stylist

Sign up to get a dose of style and inspiration + access to my exclusive TRENDY WALL ART PRINTABLE BUNDLE, seen above, just for Made in a Day newsletter subscribers! 

BY SIGNING UP YOU ARE AGREEING TO GET WEEKLY EMAIL UPDATES FROM MADE IN A DAY. SEE OUR PRIVACY POLICY.

Welcome to Made in a Day, I'm Kim, the home & lifestyle blogger, former wig stylist, floral designer, and now Park Lane Stylist behind the blog. Living seaside in Southern California, my blog is where I share my love of DIY coastal decor, digital art prints, fun fashion DIYs, and great recipes. I also write about my experience as a former wig stylist who now wears a hair topper!

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.